Software

Icon QuickTips

Add Security Unlock Keys: Command is Security then Show Edit Security Key.                          

ASCI file: Exports ASCI file of all graphed data. Command is File then Print/Save Ascii data.

Autoscale:     Displays entire Runfile.

Average: 

Minimum / Maximum / Average of graphed channels. Move graph cursor to desired start point. Place a [ bracket. Move cursor to desired end point. Place a ] bracket.   

Channel Button:    

Left click over Channel Button to open channel on graph. Continued Left clicking will change trace color.

Right click over Channel Button to change channel settings.

Channel Font / Log Font Size: Adjust display size of Channel and Log font. Command is Settings /Preferences

Channel Mirror:

Ability to retain currently graphed channels, when opening new laps or switching between active laps.

Clear (Erase) all graphs:    Clears all graphed channels by single or double click of icon.

Close:     (Ctrl+C)   Left click to close active file.

Configuration File:  

To open, select File then Open Car Configuration. Blue wrench indicates Config file. Right click over

any channel button to change settings.

Distance/Segment Mode: Command is View then Segment X Mode.

New Upload (Download):    (Ctrl+N)

Obtain data from completed run. Connect cartridge or serial cable into logger and select icon.

Fast Graph Toggle: Utilize Up or Down key on keyboard. Toggles quickly through Main Graph area.

File Security Settings: Access to system security settings. Command is File / Show File Security Settings.

Lapfile:      One lap of data contained within Runfile. Access by Right clicking over Runfile tab.

Lap Markers / Edit:     Provides ability to add / remove lap markers.

Logging Parameters: 

Recording time / Record Enable Channel / Real Time Channels / Real Time Port Settings / Logger Serial Number. Right click over Module channel button in Config file. 

Math Channel:  (Ctrl+M)

Create math channel data from hardwired channels. Command is Edit / Channel Maintenance.

Open File:    (Ctrl+O)  Open Runfile from user’s PC.    

Open Lap: 

Right click over Runfile. All lap times created during run will be displayed.

Organize Panes:

Toggle through pre-set screen views of Channel Button, Graph and Runlog pages.   

Quick Graphs:

Graph often used channels, such as “Steering/Throttle/Brake”. Eliminates need to select each channel.

Read Config: 

Commands logger “read” all connected sensors (V-Net systems). Select Edit / Read.

Send (Write) Config:  

Commands logger to “send” Config file and changes to data logger (V-Net systems). Select Edit / Write.

Runfile:

All data from one run or outing on the track. Within the Runfile are all Lapfiles for that run or outing.

Runlog Pages: 

Data entry pages below graph area. To open, click on appropriate tab. Click Organize Panes to view all.

Save:  (Ctrl+S)    Save changes to open files.

Scaling: 

Defines Minimum / Maximum values on graph. To change, Right click over desired Channel Button. Changes made in a Run file affects only the open run. Changes in the Config file affects future downloaded runs.

Scaling Sets:    User created scaling settings. Command is Settings then Select Chart Scaling Sets.

Shift Left/Right:     Moves graphed data left or right.

Smoothing:    

Used to smooth graph line. Right click over desired Channel Button. Move slider left or right.

Telemetry (Real Time):    Starts telemetry. Select Telemetry, then Run or Stop.

Track Map (Create):    Accessed through Runlog pages. Select Create IMS Track or Create GPS Track.

User Scale:     Displays entire Lapfile.

Zoom In / Out:     Zooms graphed data in or out, per each click of the mouse.