|
 |
| Adding Gauges to the G2X Kit |
| Adding a Single Gauge to the G2X Kit |
 Determine the mounting location of the gauge.
Note: Gauges must correspond to sensors that are currently installed on the G2X Vnet system. - Connect the Gauge Tee Cable to the gauge.
- If the 24” Gauge Tee Cable will not reach a location on the AUX to Vnet cable in which it may be connected, it will be necessary to utilize Vnet Extension cables
- Complete final connection of all cables.
|
|
| Adding Multiple Gauges to the G2X Kit |
 Following the previous instructions, simply mount the additional gauges and connect each gauge to the next gauge, through the use of Gauge to Gauge cables. The last gauge connects to the AUX to Vnet cable by means of the Gauge Tee Cable. |
|
| Gauge Installation Tips |
- Multiple gauges may be installed in any order
- Each gauge arrives with instructions concerning required software updates. View Example
|
|
|
|
