Installing the G2X Kit

These V-Net modules have been created to facilitate interfacing with some of the popular electronic fuel injection systems that are on the market. Rather than having to install duplicate sensors to monitor functions that are already being monitored by the EFI system, these modules allow the G2X to share the data collected by these systems. Each EFI Data Interface module is equipped to allow direct connection into the EFI system. The shared data can be recorded or displayed just as you would any function monitored independently by your G2X. The individual functions monitored by each EFI system are outlined in the chart below.

  V-Net EFI Interface Modules
         Accel DFI, Gen 7
230-VM-EFIDFI
  
  Autronic
(Except SM4 Model)
230-VM-EFIAUT
  
  Autronic SM4
230-VM-EFIAUT4
  
  Fast
230-VM-EFIFST
  
  AEM
230-VM-EFIAEM
  
Monitored Data ACCEL DFI AUTRONIC FAST AEM
Engine RPM X X X X
Throttle Position X X X X
Air/Fuel Ratio X X X X
EFI Voltage X   X X
Battery Voltage   X    
Water Temperature X X X X
Charge Temperature     X  
Ambient Temperature   X    
Manifold Temperature   X   X
Intake Air Temperature X      
Manifold Pressure X X X  
Exhaust Back Pressure   X    
Ignition Timing X X X  
Knock Retard X   X  
Injector Pulse Width X X X  
O2 Diagnostic X   X  
O2 Correction X   X  
Power Adder Enable X   X  
Power Adder X   X  
Mile Per Hour   X    
Speed   X    
EGT       X
Engine Load       X
Gear Indicator       X

We accept Visa, MasterCard and American Express
Racepak Data Systems
949-709 -5555
30402 Esperanza        Rancho Santa Margarita, California 92688
Fax (949) 709-5556         www.racepak.com